Cheek raiser

[OkayShooter]

Got a link?

https://www.canadiangunnutz.com/for...th-my-3d-printer.2352413/page-2#post-20933707

 

[Longstud]

Just insure whatever you choose allows options for removing your bolt. Sucks having to remove action from the stock! Advantage of adjustable risers.

 

[Buck1950]

One of the reasons I decided to pay $50.90 which includes shipping and taxes. . . . paid less than 20 bucks extra. Well worth the peace of mind.

Does your bolt 'clear' the riser when you take it out? How many times will the velcro last, or does it release easily? Mine in the B22 FV in Post #13 just needs to drop the 'front' of the riser about 3/4".

 

[AlbertaBandit]

Solely Canadian

 

[Canadiankeeper]

One of the reasons I decided to pay $50.90 which includes shipping and taxes. On top of it I know what I am getting. I've red amazon reviews on the bolt on version. All sorts of complaints regarding supplied hardware being rusty, wrong colour and poor quality. I didn't want to play lottery and paid less than 20 bucks extra. Well worth the peace of mind.

Yea, nothing a trip to HD cant get fixed for 1 dollar. Go pick up a stainless bolt or just drop some oil on it.
Mine showed up green, pictured black. I ordered 2. Both came in as green. Sent them a message. Sent me two more black ones free of charge. So now I have 4... lol My cost per riser, 16 bucks now. LOL Pretty good deal! Super sturdy.

 

[Canadiankeeper]

Does your bolt 'clear' the riser when you take it out? How many times will the velcro last, or does it release easily? Mine in the B22 FV in Post #13 just needs to drop the 'front' of the riser about 3/4".

Perks of the adjustable risers that drill into it! Loosen, drop and its good to go.

 

[OkayShooter]

I never liked any riser that didnt bolt or glue on. As its a pain to deal with ever shifting strapped on cheek rest/risers.

 

[wheelin_ca]

I have one of the amazon ones on a savage. didn't want to drill the stock, so i set it where i wanted it, then secured it with two blobs of caulking in the void. its stuck, but if i ever want to remove it, i can peel off the caulking and its like it was never there, (already removed once to test the theory)

I think I used black mono. just wish the riser didn't have the holes for the bolts, but it works for what it is

 

[Buck1950]

I have a cheek riser on my CZ-VMTR that I 'made' from 'mouse-pad and Duck tape. It's been in place for 2-years with Alien Tape I needed the height due to a 419-30* rail and 8-34x56mm FFP scope. I just couldn't drill that butt

 

[Longstud]

I have a cheek riser on my CZ-VMTR that I 'made' from 'mouse-pad and Duck tape. It's been in place for 2-years with Alien Tape I needed the height due to a 419-30* rail and 8-34x56mm FFP scope. I just couldn't drill that butt
View attachment 1069940
View attachment 1069941

Don’t blame yah Buck for not wanting to put holes in such nicely figured piece of wood!

 

[Canadiankeeper]

The vast majority of wood stocks I agree, we dont want to drill but most rifles are plastic and hollow. No real issue with drilling it.

 

[Ghillbert]

Another option for no drilling, not for everyone for sure but working for me. Bolt comes out fine and lucked out it’s the perfect height for me. IIRC 50-60$ on Azon came with couple neoprene type pads like mousepad but thicker you can add or not for slight recoil mitigation, not as good as limbsaver but it’s something.