Cooey 600 Disassembly?

[mmattockx]

I have seen threads on this, but search is failing me. Lots of Cooey 600 threads, but none with disassembly instructions.

To pull the bolt I think I recall it is necessary to pull the action out of the stock to allow the mag tube to slide fore/aft, is that correct? Any other tricks/kinks I need to know about to do a thorough cleaning?

This gun was owned by my GF's mother and it has seen some hard miles. I want to at least clean it up and see how it shoots, then maybe refinish it if the functioning is sound.


Thanks,
Mark

 

[drslav]

take the stock off. underneath there is a stud and a nut. you need to loosen the nut and lower the mag tube. Bolt will some out

 

[camerl2009]

its the same as the cooey model 60 http://www.youtube.com/watch?v=h-VEMwcxr0k here

affter shooting mine since i was 2 i can take it down blind folded

 

[gunsaholic]

I have a 1969 Canadian Winchester dealers manual that shows the parts breakdown and numbers for Cooey/Winchester models. I could copy and send you the breakdown for the 600 if you like. However, the above instructions are correct. Just don't get carried away re-tightening the locking nut or you could bend the tube.

 

[mmattockx]

take the stock off. underneath there is a stud and a nut. you need to loosen the nut and lower the mag tube. Bolt will some out

Awesome, that should do it.

gunsaholic, PM sent.


Thanks for the help, gentlemen.


Mark

 

[cyclone]

its the same as the cooey model 60 http://www.youtube.com/watch?v=h-VEMwcxr0k here

affter shooting mine since i was 2 i can take it down blind folded

That YouTube vid has to be stickied....

 

[aletheuo]

I second that motion.

 

[cyclone]

I second that motion.

It works for stripping the Cooey 60, stripping the Cooey 600, assembly, disassembly, and all general Cooey bolt woes for those repeaters....

And yes , I did pepper the above with "searchable" terms !....

So, in that spirit , the field-strip of the Cooey begins at around 4:55......