Cooey 840 / 84 stuck extractor

ihaveonequestion

New member
Rating - 0%
0   0   0
so i have a old 410 cooey/win single barrel shotgun that wouldn't open. I had to completely take everything out (hammer spring, etc) and was able to get it to come off by tapping on the bottom of the extractor with a punch.
but its still completely stuck, even if i spray a bunch of wd-40 into the extractor mechanism (i don't have any penetrating oil on me so i'm trying that) it won't move back out. i even removed the pins holding it together, and it still wont move. the spring is still fine and everything too. only idea would try to get a smaller punch into the tiny space and move it out manually, and clean whatever is jamming it.
 
There is a spring in the ejector assembly and it may need to be replaced. Also, it's good to clean out all the grit out of the slot. And, if needed, use some very fine grit sandpaper or emery cloth paper in the slot - and use it sparingly so that the parts will move freely again.
 
Back
Top Bottom