cooey mod 60 parts? Help

GunPunk

GunPunk

New member
Rating - 0%
0   0   0
Location
BC
I need parts to put scope on, i bought a weaver #2 side mount, just dont know what else i need or where to get the parts. Any help would be greatly appreciated. Thanks
 
If you bought the vintage N2 mount, you don't need anything else. The original weaver mount is a side mount so the receiver would need to have been drilled and tapped on the side. If you have a modern weaver mount, then I don't know.
 
gunsaholic said:
If you bought the vintage N2 mount, you don't need anything else. The original weaver mount is a side mount so the receiver would need to have been drilled and tapped on the side. If you have a modern weaver mount, then I don't know.
Click to expand...


My old 60 the scope mounted with screws provided in the kit. Didn't need to drill or tap at all.
 
Yes, some of the model 60's came from factory drilled for a weaver side mount. I have a model 60 in the box, never fired. Right on the end of the box it says drilled and tapped for a weaver side mount.
 
Hello guys...

My son was just received a cooey .22 repeater that belonged to his grandfather. It's in rough shape but the sentimental value is huge to him.
I've cleaned it up and it all seems in working order however it's missing the follower, spring and cap for the magazine tube. I've looked all over the net but so far can't seem to find parts.
I can find Cooey's in great shape for $100 - $150 but it's not his Grandfather's gun. Does anyone know where I can Find the parts I need so my son can shoot his Grandfathers gun?
Any advice would be great.
Thanks
 
This was in another thread about a cooey 39" weaver side mount #48402 and weaver #49350 " the first number is the side mount, and the second number is the rings. They are 1 in rings I don't know where to get the 3/4 rings
 
You must log in or register to reply here.
Back
Top Bottom