Cooey Model 75 Extractor Problem

[kenton9379]

I just dug out my dads old cooey model 75. With a little love I've been able to get back to a good looking and working order. But on taking it out to the range I found that the extractor is not working and leaving the shells in the chamber after firing. I have been looking around and can not find a shop near me that has one. Dose anyone know of a shop in the Vancouver area or an on line shop that might have it?

Thank's

 

[islandguy]

Try VIP Firearms (Sheldon Stoller)
He is in Winnipeg.
204-229-5455
sstoller@shaw.ca

I bought a couple from Sheldon a few years back as replacements for the ones on our club's youth group Cooeys. They were only about $10 each as I recall. The weak extractor is the most common issue with well-used Cooeys. The extractor is not easy to remove or replace, but it can be done if you are careful. I only broke one out of three that I did.

 

[kenton9379]

Thanks For that.

I removed the pin to clean and oil behind it thinking that it was just stuck. They are a bit of a pain to get out and in.