CZ 452 rail opinions

C

canadianshooter

CGN Regular
Rating - 100%
69   0   0
Location
Northern BC
Hi All. I’ve found that as I shoot further with my .22 CZ 452 Trainer I’m running out of scope adjustment. I’m maxed out at 200m, already having to hold a bit. I’ve got a Sightron 4-12 SIH with turrets on it. I was thinking a 20moa rail may be the answer. Anyone got some input on what they’ve done with their 11mm rail and how it’s worked? I see MDT makes a rail but can’t even find a picture of it mounted. Thanks.
 
I have bought and used a DIP 11mm 25MOA picatinny rail on my 452. It worked fine. I used it for a while, but I took it off because I only shoot at 50m now and don't need it, and I went back to my CZ dovetail rings. Note that the DIP rail screws friction fit down on the top of the dovetail and the screw ends will dent the fine ribs on its top, leaving circular dents marring the finish. I found this out when I took it off and was a little disappointed.

Go Big Tactical sells Area 419's CZ 455 rail in 15 and 30 MOA. Area 419 website says it will fit the 452 as well. I have not seen this in person, but it looks like the clamping screws work from the side to clamp against the dovetail, so I am guessing no marring of the dovetail's finish, but I don't know. They don't specify 11mm or 3/8, so you might want to check to see if it fits both.
 
canadianshooter said:
Thanks 45CAT. Didn’t know there was a offset option there. I can’t see it on their website. Do they just sell a set of inserts with can’t?
Click to expand...
With the inserts you can raise and lower the tube. Inserts can come 0, +5 etc. With a little tinkering you can put negative in the back (bottom) and positive (bottom) and angle the scope /
 
You must log in or register to reply here.
Back
Top Bottom