CZ 75 SP01 Shadow Target vs CZ 75 SP01 accu shadow
- Thread starter leflingeur
- Start date
CZ 75 SP01 ACCU Shadow #91730
USPSA Production Approved!
Features
*CZC Stainless steel barrel bushing.
*CZC Stainless steel reverse plug.
*CZC SHORT reset trigger system “CZC SRTS”
*CZC HAJO Competition, height adjustable rear sight.
These modifications have been added to the already customized CZ Custom SP01 Shadow Pistol. #91029
We have been very busy at the CZ Custom Shop over the last few months. We have been working and perfecting some new products and parts for the SP01 Shadow and the CZ 75 Shadow. This details the changes brought about to create the CZ 75 SP01 ACCU SHADOW.
Let’s talk about the difference
The new barrel bushing is threaded into the slide; the bushing is fitted to the barrel creating far less play than the current bushing system. The bushing also retains the new stainless steel guide plug.
The bushing keeps the front sight in the slide so no pin is necessary or needed (fitting the pin will damage the bushing threads.)
The bushing will need to be removed before the barrel can be taken from the gun.
Ransom Rest testing at 50 yards with Fiocchi 125 JHP (A ZERO bullet) has proved group of less than 3” compared with a factory new gun at about 5.0”. At 25 yards the groups were around 1.2” a one-hole group.
This can be retrofitted by CZC to any CZ with a full width slide.
What’s new and very exciting is the CZC SHRT reset trigger system. People have been asking for a shorter faster reset without the trigger swinging all the way forward in SA mode, now we have it.
We have taken almost all of the forward movement out of the single action position with the trigger moving on average less than a 1/16 (0.0625”) before stopping. We have basically created a 1911 single action on a double action gun.
PLEASE NOTE: This cannot be fitted to a B style guns, it can only be fitted on non firing pin block models. (NON-B GUNS)
The CZC HAJO, is a height adjustable only competition or tactical sight, same sight picture as our familiar fixed models, but this sight with no modification to the slide fits in the “SHADOW ONLY” rear sight cut.
We have incorporated a positive click adjustment screw that will not move under recoil, this EDM sight will move approx 0.1 millimeter = 0.003 inch per elevation click.
The notch is .120” Wide and .095” Deep.
HAJO Comp Weighs 25.88 Grams / 0.912 Oz
HAJO Tac Weighs 25.61 Grams / 0.903 Oz
In the neutral position it will give 0.5 millimeter = 0.019 inch of Up and DOWN elevation. This is plenty of adjustment to get that shot elevation exactly where you require it. The front sight required is a 7.5mm tall post (when measuring, start from the base of the front sight)
REQUIRES A 7.5mm FRONT SIGHT
ONLY FOR SHADOW REAR SIGHT CUTS CHECK THE PHOTO.
All of the parts are retrofittable on a customer existing pistol. The CZC Bushing and Plug and the “CZC SHORT Reset Trigger System” will be CZC fit only. The CZC HAJO can be supplied as a part for customer fitting and will require a 7.5mm Front sight.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
CZ 75 SP01 Shadow Custom TARGET * ONLY AVAILABLE THROUGH CZ-USA and their dealers*
Custom Version of Shadow
Fully Adjustable Rear Sight Machine into the slide for Extreme Low Mount
Fiber Optic Front Sight
CZ Custom SA DA Hammer & Main Spring
Stainless Steel Guide Rod
Tune Trigger Components (Reduces Single and Double action trigger pull)
Install and Tune 13lb Main Spring and 11lb Recoil Spring
Re profile and Polish Dis connector and associated surfaces.
Re Profile Slide Stop For Magazine release with Heavy / Long Bullets
Polish underside of Dis connector rail and break breach face edge
Thin Black Aluminum grips
Includes (3) 19 round 9mm magazines We will swap for 10 round magazines for appropriate states
Reliability Check. Zero Check with Factory Ammunition
Not for sale to CA Not on DOJ Approved List
FAQ on trigger Pull
The CZ custom hammer will give you a "full" trigger pull of about 3.8 to 4.2lbs but creep free. The reason I say ?full? is that is what the trigger will need to activate fully. I.e. hanging a weight on the trigger. If we could actually weight the break point of the sear less the trigger return spring, The actual beak point of the sear hammer engagement is about 1.5/2.0Lbs the rest is the trigger return spring, since we normally don't let the trigger all the way forward for subsequent shot the sear break point matter more then overall trigger weight. To lighten the trigger more it is necessary to lighten the trigger return spring, this can be done by careful bending, also replace the mainspring with something lighter a 13lb or 15lb mainspring, this depends on the type of ammo you are going to shoot? I shoot a 13Lb mainspring, having said that I load my own ammo so can choose the primer sensitivity and depth.
FYI
The above work can be carried out on any and all standard SA / DA style CZ Pistols. We do work on Decoker Models the cost is slightly higher. If you have a question please feel free to ask further questions or email me for a quote for work to be done on your own CZ firearm. We can do almost anything to CZ Pistols ?The Impossible we do at once, Miracles take a little longer?
USPSA Production Approved!
Features
*CZC Stainless steel barrel bushing.
*CZC Stainless steel reverse plug.
*CZC SHORT reset trigger system “CZC SRTS”
*CZC HAJO Competition, height adjustable rear sight.
These modifications have been added to the already customized CZ Custom SP01 Shadow Pistol. #91029
We have been very busy at the CZ Custom Shop over the last few months. We have been working and perfecting some new products and parts for the SP01 Shadow and the CZ 75 Shadow. This details the changes brought about to create the CZ 75 SP01 ACCU SHADOW.
Let’s talk about the difference
The new barrel bushing is threaded into the slide; the bushing is fitted to the barrel creating far less play than the current bushing system. The bushing also retains the new stainless steel guide plug.
The bushing keeps the front sight in the slide so no pin is necessary or needed (fitting the pin will damage the bushing threads.)
The bushing will need to be removed before the barrel can be taken from the gun.
Ransom Rest testing at 50 yards with Fiocchi 125 JHP (A ZERO bullet) has proved group of less than 3” compared with a factory new gun at about 5.0”. At 25 yards the groups were around 1.2” a one-hole group.
This can be retrofitted by CZC to any CZ with a full width slide.
What’s new and very exciting is the CZC SHRT reset trigger system. People have been asking for a shorter faster reset without the trigger swinging all the way forward in SA mode, now we have it.
We have taken almost all of the forward movement out of the single action position with the trigger moving on average less than a 1/16 (0.0625”) before stopping. We have basically created a 1911 single action on a double action gun.
PLEASE NOTE: This cannot be fitted to a B style guns, it can only be fitted on non firing pin block models. (NON-B GUNS)
The CZC HAJO, is a height adjustable only competition or tactical sight, same sight picture as our familiar fixed models, but this sight with no modification to the slide fits in the “SHADOW ONLY” rear sight cut.
We have incorporated a positive click adjustment screw that will not move under recoil, this EDM sight will move approx 0.1 millimeter = 0.003 inch per elevation click.
The notch is .120” Wide and .095” Deep.
HAJO Comp Weighs 25.88 Grams / 0.912 Oz
HAJO Tac Weighs 25.61 Grams / 0.903 Oz
In the neutral position it will give 0.5 millimeter = 0.019 inch of Up and DOWN elevation. This is plenty of adjustment to get that shot elevation exactly where you require it. The front sight required is a 7.5mm tall post (when measuring, start from the base of the front sight)
REQUIRES A 7.5mm FRONT SIGHT
ONLY FOR SHADOW REAR SIGHT CUTS CHECK THE PHOTO.
All of the parts are retrofittable on a customer existing pistol. The CZC Bushing and Plug and the “CZC SHORT Reset Trigger System” will be CZC fit only. The CZC HAJO can be supplied as a part for customer fitting and will require a 7.5mm Front sight.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
CZ 75 SP01 Shadow Custom TARGET * ONLY AVAILABLE THROUGH CZ-USA and their dealers*
Custom Version of Shadow
Fully Adjustable Rear Sight Machine into the slide for Extreme Low Mount
Fiber Optic Front Sight
CZ Custom SA DA Hammer & Main Spring
Stainless Steel Guide Rod
Tune Trigger Components (Reduces Single and Double action trigger pull)
Install and Tune 13lb Main Spring and 11lb Recoil Spring
Re profile and Polish Dis connector and associated surfaces.
Re Profile Slide Stop For Magazine release with Heavy / Long Bullets
Polish underside of Dis connector rail and break breach face edge
Thin Black Aluminum grips
Includes (3) 19 round 9mm magazines We will swap for 10 round magazines for appropriate states
Reliability Check. Zero Check with Factory Ammunition
Not for sale to CA Not on DOJ Approved List
FAQ on trigger Pull
The CZ custom hammer will give you a "full" trigger pull of about 3.8 to 4.2lbs but creep free. The reason I say ?full? is that is what the trigger will need to activate fully. I.e. hanging a weight on the trigger. If we could actually weight the break point of the sear less the trigger return spring, The actual beak point of the sear hammer engagement is about 1.5/2.0Lbs the rest is the trigger return spring, since we normally don't let the trigger all the way forward for subsequent shot the sear break point matter more then overall trigger weight. To lighten the trigger more it is necessary to lighten the trigger return spring, this can be done by careful bending, also replace the mainspring with something lighter a 13lb or 15lb mainspring, this depends on the type of ammo you are going to shoot? I shoot a 13Lb mainspring, having said that I load my own ammo so can choose the primer sensitivity and depth.
FYI
The above work can be carried out on any and all standard SA / DA style CZ Pistols. We do work on Decoker Models the cost is slightly higher. If you have a question please feel free to ask further questions or email me for a quote for work to be done on your own CZ firearm. We can do almost anything to CZ Pistols ?The Impossible we do at once, Miracles take a little longer?
