I have one. Trigger is 2 lbs, single action. Not production legal, a pure standard division gun. The single action trigger is not production legal on a 75C.
Comes with spare slide stops, and buffers, 4 mags.
Few problems with the gun: the rifling is quite deep, on mine at least. So every time you use a hard bullet, like montana gold points, the gun tend to twist in your hands quite a bit. If you are right handed, the extra long extended, mag release will bite into your left hand. So I always wear gloves at least on my left hand, when shooting it. The grip is very big, bigger than any other 75/85, probably about the same as the 97. Of course you can buy custom made aluminum grip panels and grind down the grip, there's a lot of metal there. The rear sight tend to come lose if not made extra tight using the screw. The slide is narrow and hard to get a grip on.
Now for the good points: shoots very accurate, cycles great, tight chamber, need good sizing dies, otherwise you'd have feeding problems. No problems with factory ammo. Eats everything. Little to none modification needed. You can literally take it out of box sight it in and shoot standard matches with it. May need one more mag though. The slide and frame fit is very tight, the bluing on the slide is very good. The frame is epoxy coated. Very good grip angle, aims itself.
