Cz 858 help please

[Canada Targets]

I have had my cz 858 for a few years now an has been almost trouble free.

Over the weekend at the range I shot one round, then put the safety on, when I took the safety off to shoot again the trigger feels as if the safety is still on. I noticed before shooting the first round that safety switch felt "gritty" buy didn't think much of it.

Now the firearm is clear, but still cocked and no allowing me to strip it. How can I strip it when the firearm is a still cocked or how can I trip the trigger mechanism?

I am assuming that the safety is the issue and will
Likely have to purchase a new parts kit from wolverine or similar company to replace it.

I figured I would ask those that know
More than I do instead of wreck something and then sulk in private.

Your help is greatly appreciated.

 

[svt1940]

I have had my cz 858 for a few years now an has been almost trouble free.

Over the weekend at the range I shot one round, then put the safety on, when I took the safety off to shoot again the trigger feels as if the safety is still on. I noticed before shooting the first round that safety switch felt "gritty" buy didn't think much of it.

Now the firearm is clear, but still cocked and no allowing me to strip it. How can I strip it when the firearm is a still cocked or how can I trip the trigger mechanism?

I am assuming that the safety is the issue and will
Likely have to purchase a new parts kit from wolverine or similar company to replace it.

I figured I would ask those that know
More than I do instead of wreck something and then sulk in private.

Your help is greatly appreciated.

I think you can remove the pistol grip then you can use somes sort of hook or a little screwdriver to trip the sear.
Joce

 

[umcalleg]

x2, i saw a thread about that a while ago

 

[Vengeance]

http://www.canadiangunnutz.com/forum/showthread.php?t=603359

Scroll down to 3d. I have used an Allen wrench and broke the end so the "L" is a little shorter. You have to fish around a little but you should be able to get it. Don't pull on the search spring but the search and it should release so that you can strip it. The issue may be not enough upward pressure on the search spring. The thread should give you the info you need.