CZ-858 trigger group assy.

[Undergiver]

Does anyone know if there is a step by step instruction on the assembly of the CZ-58 trigger group ?


thanks

 

[Satain]

Good Vid done by 1 of our own CGN members

[youtube]lEN-mp6sRbI[/youtube]

 

[StrikerSW]

Satain your a handy guy to have around. Trust you to know where we can find the info someone requires.

Great video by nwrepka !!!

 

[Undergiver]

Just finished putting my FSN together and the safety is loose, I can pull it out with my finger. It looks like it's in all the way and it does fire when I pull the trigger. Can someone help me out.

 

[Satain]

Just finished putting my FSN together and the safety is loose, I can pull it out with my finger. It looks like it's in all the way and it does fire when I pull the trigger. Can someone help me out.

Please watch the 25th second of this video and make sure that that tab that is pushed down is back in the orignial position.

 

[Undergiver]

That trigger group is different then the FSN

 

[svt1940]

In my CZ858, the safety is held on with a small set screw if i'm correct.

 

[Undergiver]

There is no such set screw on the FSN

 

[olansky]

doesnt matter its not locked if you can pull it out

 

[Undergiver]

doesnt matter its not locked if you can pull it out

Whats not locked ?

 

[Satain]

On the CZ 858 the internals are different and there is an actuall allen key required to remove the safety. So please do not compare the in sides.
Undergiver NOW FOLLOW THE BIG WELDED TAB AND LOOK ABOVE THE TRIGGER WERE IT MEETS THE RECIVER THERE IS THE LOCKING T TABE THE IF IT'S NOT INSIDE IT'S LITTLE GROOVE THAT WILL MAKE IT STRAIGHT AND LEVEL THE SAFETY WILL COME OUT.
The tab can be even seen in this photo right across from the black nub siting at the front of the reciever.

 

[Undergiver]

I have the locking tab pushed down, the only pin its locking in is the sear axis pin. I have to lift the tab to push that pin out. From what I can see there is nothing in contact with the safety except the leaf spring and the trigger. Is it me or just a poor design with the FSN series of rifles...I can take some detailed photo's to prove a point.

 

[Satain]

I have no problems with my FSN. Here is a pic with it in the proper position.

Click on the photo for a larger version.
Also please note how the saftey stick's out from the side of the reciever. Please take a picture like this and I will be able to see what is going on & help you threw it.

 

[Undergiver]

so what is locking the safety to the receiver, is it the tab ? Thats exactly how mine looks and I can pull the safety out with my fingers. I will take a pic tomorrow and show you...thanks satain.