CZ858 won't chamber rounds

Morder

Morder

New member
EE Expired
Rating - 100%
1   0   0
Location
Quebec
I went to try out my 858 last week and I had no issues overall. However, when I load a new mag and pull the bolt, if I help the bolt move a little or pull like a pussy, the round jam at an angle in the chamber, according to my flawless math I would say 26 degree up. I gotta remove the mag and wiggle or give a couple of light taps on the bolt to force it in. I'm not too happy to see a pointy round getting stuck right in the bore, even less to think the rounds violently chamber themselves when I shoot and must be scratching the #### out of my barrel if something is wrong.
 
I took a new shooter out last Friday and he had the same problem. I told him stop being nice and beat it like a red head step child! After that no problem.
 
Morder said:
I went to try out my 858 last week and I had no issues overall. However, when I load a new mag and pull the bolt, if I help the bolt move a little or pull like a pussy, the round jam at an angle in the chamber, according to my flawless math I would say 26 degree up. I gotta remove the mag and wiggle or give a couple of light taps on the bolt to force it in. I'm not too happy to see a pointy round getting stuck right in the bore, even less to think the rounds violently chamber themselves when I shoot and must be scratching the #### out of my barrel if something is wrong.
Click to expand...
Well then your gonna be real unhappy when you find out those bullets are about to get squeezed down that same barrel at a scorching hot 45,000 psi, never mind the comparatively inconsequential slight bump from a copper plated bullet impacting steel.
 
You must log in or register to reply here.
Back
Top Bottom