DAA Belt/Mag Pouches - Gear Related

K

kingdarb

CGN frequent flyer
EE Expired
Rating - 100%
41   0   0
Location
Ontario
Hey Folks,

I have a DAA belt with three of the plastic DAA adjustable mag pouches. The mag pouches didn't come with instructions (usually they shouldn't need them heh).

Thing is, I can't for the life of me figure out a way to thread the belt through the pouches as they are waaaay too tight. I tried to do it and the pouch "loops" are so tight they are going to pull the velcro off the inside of the belt.

I took one pouch apart thinking that maybe they need to be assembled on the belt - but that doesn't look to be the case.

Is there anyone out there that has this setup that can offer some advice?
 
kingdarb said:
Hey Folks,

I have a DAA belt with three of the plastic DAA adjustable mag pouches. The mag pouches didn't come with instructions (usually they shouldn't need them heh).

Thing is, I can't for the life of me figure out a way to thread the belt through the pouches as they are waaaay too tight. I tried to do it and the pouch "loops" are so tight they are going to pull the velcro off the inside of the belt.

I took one pouch apart thinking that maybe they need to be assembled on the belt - but that doesn't look to be the case.

Is there anyone out there that has this setup that can offer some advice?
Click to expand...

http://www.youtube.com/watch?v=pgqgOylsxv8

If this doesn't help, try to align the belt hanger loops with the belt, then put the thin belt hanger plate in place, force the screws in, one at a time, but don't screw it all the way in, screw a little on one side at a time, then the other side. As long as the screw can catch the thread, keep tighten it up bit by bit and the force of the thin plate will push the belt in place.

Pouch_Back_web_sm.jpg



Hope this help.
 
Last edited:
email them and they will send you 12mm screws instead of the useless 10mm that come with it. Im currently raging about this but will keep it to my own thread in the pistol forum lol
 
kingdarb said:
Hey Folks,

I have a DAA belt with three of the plastic DAA adjustable mag pouches. The mag pouches didn't come with instructions (usually they shouldn't need them heh).

Thing is, I can't for the life of me figure out a way to thread the belt through the pouches as they are waaaay too tight. I tried to do it and the pouch "loops" are so tight they are going to pull the velcro off the inside of the belt.

I took one pouch apart thinking that maybe they need to be assembled on the belt - but that doesn't look to be the case.

Is there anyone out there that has this setup that can offer some advice?
Click to expand...

call me and I will help you out, we sell lot of DAA gear.

Josko
 
You must log in or register to reply here.
Back
Top Bottom