Daniel Defense help

MCP

MCP

Regular
EE Expired
Location
Edmonton
Hey Wolverine,
I have a ddm4 v7LW bought from you, that is having some issues. Is there someone specific I can email with symptoms and pics.

Thanks,
M
 
It seems like the tip of the rounds are getting caught on a small edge between the m4feed ramp (ejection side) and the receiver causing a FTF. I have tried various ammo, and magazines, and it's still happening. It's so bad that some rounds are having the bullet pushed back into the casing. Only about 500 rds through it. I will send an email this morning
 
I have a v7 and had some issues as well with steel case after lending it to a buddy in a 3 gun match. Similar to what you describe. (no more lending).
It actually nicked the finish near the ejector side on the feed ramp and removed a small piece of the receiver. (Yeah, it is mil spec +). But I had the rifle for more than a year at that point with several thousand rounds down the tube. I used a file and corrected it and have had no issues since. I contacted DD with pics with a kinda WTF and never ever got a response.
 
You'll get a response on Monday, it sounds like it might be a feed ramp issue for sure. We will get you all fixed up.

for those of you who do have an issue with your DD, your fastest bet is to contact us directly. We are the importers and warranty center for DD here in Canada. If you contact DD directly it is going to take longer to get you fixed up as they will refer back to us in most cases as they can't send parts directly up and you certainly can't easily send your rifle back down into the US.
 
Only brass casings through this gun and I am the only one who has used it (except for a couple buddies who tried it out when I was there). Just going to try and get some good close up pictures and then send an email off.
 
Same issue with my v3. Never got it resolved. About the same number of rounds. All types of mages. LAR mags. PMags. C mags. All types of ammo. Pmc. Federal. Norinco. Green tips....

Let me know how you resolve this.
 
swbw2000 said:
Feed ramp issue so they say. Mines been back twice.

Even DD drops the ball sometimes.
Click to expand...

Thing is, after visiting the DD plant in Black Creek, they probably have a real interest in this.

As I said in my thread about my visit. DD doesn't let anything not to spec out. I'd wager they'd like to see this back if it's a manufacturers issue.
 
i have a DD Mk18 that has the barrel crooked to one side when you look at it from the front. don't know if its the barrel or the rail system.
 
You must log in or register to reply here.
Back
Top Bottom