Delete please
- Thread starter piker
- Start date
I found Socom black to be less glossy than original but still a bit shiney.
You'd probably be better off with flat or deep flat is you want a dark dull finish.
Forget where I saw it but iirc it was the more thin coats the less glossy the finish.
Never tried the stainless or silver so can't hep there. gl
You'd probably be better off with flat or deep flat is you want a dark dull finish.
Forget where I saw it but iirc it was the more thin coats the less glossy the finish.
Never tried the stainless or silver so can't hep there. gl
Flat black will match .The secret to the final finish is how you apply it .Use an airbrush and experiment with thinner coats applied from farther away.Also bake it at a bit higher temp like 235F .And spray it hot at 150F.I assume you are using 120 alox to blast it.
Would seem to be the logical way to apply it. 
