Dillon 1050 questions

Slavex

Slavex

Morning Star, The Lightbringer
Moderator
Rating - 94.7%
18   1   0
Location
BC
how the hell do you keep the stupid nut/bolt on the powder measure linkage from coming loose???? once it comes loose the stupid thing won't throw powder.
 
Just a thought - :D

You may call or write the Technical Support and order line at:
 Phone 800-223-4570 or 480-948-8009
Fax 480-998-2786
Open:
7am to 6pm Monday - Friday
8am to 3pm Saturday MST
(1400-0100 Monday - Friday
1500-2200 Saturday GMT)
We are closed on Sunday.
 
If you are talking about the failsafe system? (the rod that hangs down from the powder measure that resets it) it should have a threaded end with a plastic and metal wingnut... it should be a tight fit if it's not call dillon for a new one..
1050-pm.jpg


However the 1050 only has a 1 year warranty if you are outside of that I'll see what I can do..

**UPDATED adding a picture Yes they are worth 1000 words.
 
Last edited:
Musky Hunter said:
i thought dillon comes with lifetime warranty?
Click to expand...
not on the 1050..

From http://dillonprecision.com/template/p.cfm?maj=30&dyn=1&cookieClean=1

Dillon Precision announces the arrival of the SUPER 1050! The SUPER 1050 features a lengthened frame and a new crank assembly that provides increases functional stroke to accommodate long calibers, yet the handle stroke is at a minimum, meaning less work for the operator. The machine's new frame and crank assemblies have been improved to provide greater strength and smoother operation. The SUPER 1050 is warranted for life from defects in materials or workmanship, plus a one-year, 100-percent warranty against normal wear.


and 1 year on electric and electronic components..
 
Last edited:
While the press itself only has a one year warrantee, I was under the impression that all the associated systems were covered for life.

BTW, if you can break a 1050 at all, you deserve a new one.
 
Canuck223 said:
While the press itself only has a one year warrantee, I was under the impression that all the associated systems were covered for life.

BTW, if you can break a 1050 at all, you deserve a new one.
Click to expand...

I've had a couple people call me becuase they can't get parts for certatin things... It sorta depends on who you get on the phone... This is a cheap part and they probably will ship one out...

Cheaper for me if they will replace it.. Probably about the same speed since he's out west..
 
it's the threaded bolt that holds the whole plate assembly on the press. In looking through the downloaded manual, I see it's supposed to be a Nylock nut on the end of that bolt, not a stupid nut with a toothed star washer. That way you can adjust it for tension and leave it be.
parts are incoming from Dillon already!
 
Slavex said:
it's the threaded bolt that holds the whole plate assembly on the press. In looking through the downloaded manual, I see it's supposed to be a Nylock nut on the end of that bolt, not a stupid nut with a toothed star washer. That way you can adjust it for tension and leave it be.
parts are incoming from Dillon already!
Click to expand...

Glad the problem is solved...
 
You must log in or register to reply here.
Back
Top Bottom