Good day gentlemen
I need some help. I have been reloading some 308 on my 550b and have started to have problems with the powder measure. The problem is the tab on the slotted bell crank keeps getting hung up on the side of the powder measure. The tab is bent towards the powder measure. If you loosen the bolt that holds it together to increase the distance from the powder measure, it is now too loose to keep the bell crank cube ( the white plastic square ) in its place. I am wondering if the bell crank is supposed to have that bend in it? The tab at the top of the bell crank is bent towards the powder measure. On mine it is anyways, from the diagrams I cannot tell if it is supposed to be that way or not? It has always worked fine in the past, and is now acting up. Very frustrating.
Any help would be appreciated. Thank you in advance.
I need some help. I have been reloading some 308 on my 550b and have started to have problems with the powder measure. The problem is the tab on the slotted bell crank keeps getting hung up on the side of the powder measure. The tab is bent towards the powder measure. If you loosen the bolt that holds it together to increase the distance from the powder measure, it is now too loose to keep the bell crank cube ( the white plastic square ) in its place. I am wondering if the bell crank is supposed to have that bend in it? The tab at the top of the bell crank is bent towards the powder measure. On mine it is anyways, from the diagrams I cannot tell if it is supposed to be that way or not? It has always worked fine in the past, and is now acting up. Very frustrating.
Any help would be appreciated. Thank you in advance.
