DIY Ladder Treestand & Seat
- Thread starter Demonical
- Start date
I made a few minor changes to the treestand seat.
Added another 2"x4" cross piece in the frame, then added a plywood plate over the back of the frame, which I glued and screwed. Ties the frame together way better; far stronger.
It'll basically never come apart (without flame... haha!).
Also, I shortened the seat a few inches, and took a rasp to the corners. Smoothed it out.
Finally, I cut a small 'shim' block, so I can make adjustments to level the thing, when I screw it onto a tree.
Just need a chance to get back out there and mount it on the stand.
Added another 2"x4" cross piece in the frame, then added a plywood plate over the back of the frame, which I glued and screwed. Ties the frame together way better; far stronger.
It'll basically never come apart (without flame... haha!).
Also, I shortened the seat a few inches, and took a rasp to the corners. Smoothed it out.
Finally, I cut a small 'shim' block, so I can make adjustments to level the thing, when I screw it onto a tree.
Just need a chance to get back out there and mount it on the stand.
