Dominion Arms P762 recoil spring weight

[nbhms]

Looking for the specs on the recoil spring in the P762.

Both the spring weight and would Sig P226 recoil springs work?

Thanks for any info.

 

[CanAm]

We do not have that info, sorry

 

[reefer]

Looking for the specs on the recoil spring in the P762.

Both the spring weight and would Sig P226 recoil springs work?

Thanks for any info.

A Sig standard recoil spring for .40 s&w works in mine just fine.

 

[Makava]

Will 9mm or SIG357 work as well?

 

[hbean]

P226 factory recoil spring is 15 lb for 9 mm and 20 lb for 40 S&W and 357 SIG.

however 7.62x25 has such a large range of energy starting at 390 J and goes all the way up to 760 J, Wolff has spring weight starting from 14 all the way up to 24 you can play with.

 

[Mredward]

So is the new batch all gone?

 

[CanAm]

So is the new batch all gone?

Wasn't a new batch per se, just a release from the warranty hold back, and yes, all gone

 

[nbhms]

I took my new P762 to the range, and on almost every mag change where I used my standard amount of "slap the mag in" force the slide would release, go forward, and chamber a round on it's own.

Here at home, with the slide locked back and no mag in, I can slap the pistol grip into my support hand and it will release and slide forward.

I was thinking a stronger recoil spring might hold the slide on the slide release better, but wasn't sure if it would still cycle properly with a stronger spring.