Hi - I recently acquired a CH-4D powder measure (used) and I would like to try and find a new drop tube (or two).
The one supplied is secured by a single screw at the rear, pressure hold. It has an outside diameter of .620, internal of about .536 or so.
Any ideas on where I can obtain a replacement - I've tried the tubes I have for my Redding and they are not quite the right size it seems.
Cheers
Ron
The one supplied is secured by a single screw at the rear, pressure hold. It has an outside diameter of .620, internal of about .536 or so.
Any ideas on where I can obtain a replacement - I've tried the tubes I have for my Redding and they are not quite the right size it seems.
Cheers
Ron
