EAA witness questions
- Thread starter kershaw
- Start date
I have 1 in 10mm.
It is decent enough gun for the money...you really cannot go wrong.
You may encounter some nose-up FTFs which is common with these pistols.
If you do...
Polish your breech-face, check your extractor for any burrs and smooth out, and get some +5 or +10% Wolf magazine springs.
Mine also launched brass 25 feet or more even with heavy Wolf recoil spring.
I finally cut down the ejector and they now go around 15 feet straight back to 4 O'clock position.
Other than that, they are built like a tank, accurate, they are very ergonomic for a double-stack, and trigger is quite decent(my SA pull is around 4.5 lbs and is fairly smooth)
Here is link to a decent forum dedicated to CZ clones that includes Witness Tanfoglio Pistols.
http://czechpistols82792.yuku.com/forums/27/t/CZ-CLONE-CLUB.html
It is decent enough gun for the money...you really cannot go wrong.
You may encounter some nose-up FTFs which is common with these pistols.
If you do...
Polish your breech-face, check your extractor for any burrs and smooth out, and get some +5 or +10% Wolf magazine springs.
Mine also launched brass 25 feet or more even with heavy Wolf recoil spring.
I finally cut down the ejector and they now go around 15 feet straight back to 4 O'clock position.
Other than that, they are built like a tank, accurate, they are very ergonomic for a double-stack, and trigger is quite decent(my SA pull is around 4.5 lbs and is fairly smooth)
Here is link to a decent forum dedicated to CZ clones that includes Witness Tanfoglio Pistols.
http://czechpistols82792.yuku.com/forums/27/t/CZ-CLONE-CLUB.html
