falcon reticle sticking

N

neotekz

Regular
EE Expired
Rating - 100%
15   0   1
i just got a Falcon Menace 4.5-18x56 a few months ago, everything seems ok but im not sure about the reticle, is suppost to stick when i adjust the parallax. what happens is when i turn the parallax to infinity or closest(all the way on either ends) the elevation and windage turret will turn and the reticle will move about 20-30 clicks before it stops but can still turn the turret, the reticle just wont move anymore. if i turn the parallax off the ends a bit the reticle will be fine again. the strange thing too is that i dont think i lose the zero on my turret. for example if i turn 5 clicks past the point where teh reticle sticks it will take 5 clicks to get the reticle moving again. anyone else have this happen to their falcon?
 
Last edited:
No.
Then again, I've never turned the parallax adjustment all the way to the end limits, and tried to adjust the elevation or windage.
 
it doesn;t stick right away too it will take 30 clicks or so before it hits the point where it sticks. teh parallax on mine seems to like to be on close to infinity even if im just shooting a few hundred yards
 
thanks for the offer Allen but i got the scope from frontier firearms. you were sold out at the time. the problem is when i have the parallax set to infinity and try to turn the elevation turrent the reticle will stick at one spot after about 30 clicks or so.

should i not be turning the elevation or windage when the parallax is at infinity?
 
You must log in or register to reply here.
Back
Top Bottom