Favorite 30-06 Load??

[M12shooter]

54 gr IMR4350/Sierra 168 HPBT Match. Yours?

 

[Johnn Peterson]

55grs of IMR 4350
180gr Norma(old) SPSPBT
CCI 200 primers
C.O.L. 3.252"

 

[Levi Garrett]

56 gr IMR 4350 , 165 Sierra BT. Caution, work up load , check load book

 

[cereal83]

43 gr IMR 4064, 180 Nosler Accubond, Win lr primer

 

['Boo]

60 grains Reloder 22 under a 180 grain Ballistic Tip.

 

[Steeleco]

165gr Hornady Interbond over 57gr IMR 4350 and CCI 250 primers. This exact load in my A-bolt works with 180 gr Speer stzr's as well, they shoot same height and only 1" to the left. Great for practicing

 

[martinbns]

168 gr TSX 58.5 gr of H4350, fed match large rifle primer.

 

[Why not?]

55 gr of IMR4350 and the 180 gr Partition.

Accurate plus awesome game load!

Ted

 

[hs4570]

165 btsp Hornady and 53 gr Imr4895, winchester primer.....

 

[Scott_N]

WW Cases
CCI 250 Primers
180 Partition over 61.0 grains of RL 22

 

[bluetick]

165 grain Speer Boattail over 58 gr. IMR 4350 and 200 grains Nosler Partition over 55 grains of IMR 4831

 

[Levi Garrett]

Warning to all , work up to any load that someone puts on the internet. Mine also.

 

[OneBarfly]

49 grains of IMR4064 over 150 spitzer (whatever brand of bullet, but Sierra has proven to be very accurate for me). Never had any luck with 4350

 

[todbartell]

4350 & 165s is a go-to load

RL15 & 110 gr Vmax is another fun load, 3300+ fps

 

[the rifleman]

I've been lucky with 58.5gr of RL22, CCI LR primer. I manage great groupings with that same load for 180gr Swift A-frame, Nosler BT, and the Nosler Accubond. I get average velocitys with all three of 2560fps. Not the fastest for the 30-06, but its the accuracy I want. Plus it may make my barrel last longer.

 

[M12shooter]

Warning to all , work up to any load that someone puts on the internet. Mine also.

Darn right! Years ago a friend gave me some Barnes X data over the phone. Short of it, this dude gave me a 4 grain overcharge for 25-06 and 4350. Fired 2, 5 shot groups at the range... Dam things sure hit hard! Don't know if he was pissed or what but now I always double check with known "hard copy" data.

Ted

 

[Boer seun]

55.5 gr IMR 4831 and a plain old 180gr hornady interlock Fed 210 primer

 

[rocksteady]

61 grains H 4831/ 180 Grain Hornady Interlock/ CCI 220 primer...

CAUTION COMPRESSED LOAD and bucks good when you drop the hammer..

 

[308BAR]

150 gr SGK SPBT bullet, over 52 grn of IMR 4064, sub 1" at 100 yrds, rifle is Ruger M77

 

[ringo]

I use 60grns of R19 pushing a 165grn Hornady spire point. Good hunting accuracy, I have taken whitetail to moose with this round.