I have a Coey 600 that won't feed properly . Problem being that when you pull the bolt back the new round dosent come up all the way to line up with the chamber , unless you are really aggressive with it . I have another 600 that operates like a dream . Everything is clean and all there , anyone have a possible solution ?
Feeding issues with Coey 600
- Thread starter slug1977
- Start date
handofzeus
CGN Ultra frequent flyer
- Location
- Trout Creekish Ontario.
Try loosening the bolt (or screw) that's in front of the trigger at the bottom of the action. Thiat little bugger has to be set JUST RIGHT to allow the right bolt movement and feeding. If my memory serves correct you'l have to remove the stock from the action. Been awhile since I played with the Cooeys!
handofzeus
CGN Ultra frequent flyer
- Location
- Trout Creekish Ontario.
Kamlooky beat me to it!
Turkinator
CGN frequent flyer
- Location
- Onterrible
I had the very same problem with my 600 I just picked up! It would also puke out the first round in the tube consistently after loading and cocking.
fat tony
CGN Ultra frequent flyer
I restored a Cooey Repeater that had similar problems. I tried adjusting the set screw as previously mentioned and also tried carefully bending the lifter guide arms which are part of the receiver, and got the rifle working okay. Good Luck!
Last edited:
It can be a bunch of different things.. nut too tight binding movement, extractors not quite right, lifter mechanism not right... bend, twist - whack it with a hammer... eventually you will break it or make it work... never worked on one I liked... absolutely horrid design. It is like Rube Goldberg cobbled one together and eventually made it work and then said lets make a million of these...
fat tony
CGN Ultra frequent flyer
Mine works fine - Love the reciprocating magazine too 
! One of the nicer features of the Cooey #60 is the hefty extractors - the empty is coming out, no question about it!
The design might seem a bit bizarre, but my Coeey repeater is a keeper.
! One of the nicer features of the Cooey #60 is the hefty extractors - the empty is coming out, no question about it!The design might seem a bit bizarre, but my Coeey repeater is a keeper.
