Finished 22 semi build - fast range report

[hometownhero]

Looks awesome as is

 

[camster]

Looks awesome as is

Sure does...Could be shaped to a personal fit, but I'm too much a miser to lop off anything that nice.

 

[icedragonmx]

Very nice as is. I would not cut it any shorter. Is that a 20" KIDD barrel? Look forward to seeing some targets

 

[plpfromnb]

Very nice as is. I would not cut it any shorter. Is that a 20" KIDD barrel? Look forward to seeing some targets

Yes, 20" KIDD. I'll post up some targets for sure.

 

[plpfromnb]

Got to the range this morning and put 50 or so rounds through it. It cycled bulk Winchester 555 without issue and also cycled SK Rifle Match without issue at all.

Here are the shot for groups shot with it at 50 yards with SK Rifle Match. I'd like to say that the flier on the large group was the rifle but it was the first group I shot for group and the second stage of the 2 stage trigger went off before I was expecting Love that trigger once you get used to it.

and the last and best one of the morning... then I decided to end on a good note...

 

[pickeringchris]

I'm no expert but I think you are measuring the wrong way (not in your favor).... Shouldn't you be measuring from the center of the first hole to the center of the furthest hole?

 

[DAR 701]

I'm no expert but I think you are measuring the wrong way (not in your favor).... Shouldn't you be measuring from the center of the first hole to the center of the furthest hole?

Or, measure as he has done and then subtract the bullet diameter (.223). Those are some nice groups!

 

[plpfromnb]

I find it easier for pics to measure outside to outside and then I know if its in the low .7s its close to a half inch group. You are correct. center to center is the correct way.

 

[icedragonmx]

Some very nice shooting! Where are you getting the SK Rifle Match from?

 

[Innercity]

What are those targets called and where can I get some?

Nice groups, So you going to cut it?

 

[plpfromnb]

Some very nice shooting! Where are you getting the SK Rifle Match from?

Hirsch Precision in NS.

 

[plpfromnb]

What are those targets called and where can I get some?

Nice groups, So you going to cut it?

I believe that I have them as a PDF file. I will have a look through my downloaded targets and will let you know tomorrow. If I do, I can email it to you if you'd like. I just printed them out on a laser printer on heavy cardstock paper.

I do think I will cut it. It felt a little bulky getting setup and comfortable. I'll go to just behind that knot and try it again.

 

[simko]

nice wood. i woyld trim it though. wgat grade was that wood? ive been thinking about getting a syock from richards

 

[plpfromnb]

nice wood. i woyld trim it though. wgat grade was that wood? ive been thinking about getting a syock from richards

I ordered AAA grade. Whether it is or not truly AAA I'm not positive but it turned out nice just the same

 

[super7]

If you are shooting mostly from the bench, I wouldn't trim it. If you'll be shooting a lot offhand, you might want to shave some weight off it.

 

[icedragonmx]

Hirsch Precision in NS.

Thanks!

 

[unicorn gravedigger]

Cut it? Yes, 2.5 " - 3" back.