Follower question

[PeterPan]

I need some help.
This summer I am going to Europe to shoot and for that occasion I had to get 126mm mags and then I went with Dawson Precision Base Pad (+1) and Grams Follower kit (follower and 11 coil spring).
When I shoot using magazines with Grams follower, I experience feeding problems and I wonder if I should file right side of the follower to make bullets enter the chamber easier?

Any ideas? Anyone had similar issues?

Thanks

 

[MOBILE 1]

What type of feeding problem are you having ?
Is the round staling o the feed ramp ?
Is the slide locking back with one round still in the mag ?

 

[PeterPan]

What type of feeding problem are you having ?
Is the round staling o the feed ramp ?
Is the slide locking back with one round still in the mag ?

Thanks for asking.
Yes, usually is slide locking back with one round still in the mag, however there was couple instances where round was stalled on the feeding ramp.

 

[MOBILE 1]

Check your PM's

 

[Madness]

you need to remove the part of the follower that contacts the tab on the slidestop pin. the slide won't lock back at all anymore, if you still want the lock back then you can thin that area out or grind the bottom of the slide stop pad.

 

[Walter Hornby]

first thing to do is call Bevin at Grams. he will give you the best advice out there.

 

[PeterPan]

THANKS to all of you guys.