I now have owned and played with this rifle for about three months and I would like to present my review.
Weight:- Bare rifle is slightly heavier than advertised. However total weight is still within the realm of a light weight mountain rifle

Fit:- is VG to excellent with some kevler fibres remnants on some edges
Finish:- VG. The Kryptek camo. finish is subjective. Surface does have the odd very small pin sized bumps
Trigger:- Excellent. I turned mine to 3 1/2 lb. No creep nor after-travel
Bolt:- Very smooth, especially if oiled
Extraction:- no problem. Does it every time
Accuracy:- With my hand-loads I can get 1 MOA without a lot of tweaking

There are a couple of minor annoyance.
1. The pistol grip is closer to the rear of the trigger guard than others. You can have your knuckles hit by the trigger guard during firing
2. If you fire factory ammo. you have no problem. With reloads you have to use virgin brass (preferably resized Lapua which are harder). If you use fired brass from other rifles they have a tendency to get sticky and could be hard to extract. That is due to the bench-rest size chamber this rifle has
I would buy another one of these rifles if the need arises in the future.
Tom
Weight:- Bare rifle is slightly heavier than advertised. However total weight is still within the realm of a light weight mountain rifle

Fit:- is VG to excellent with some kevler fibres remnants on some edges
Finish:- VG. The Kryptek camo. finish is subjective. Surface does have the odd very small pin sized bumps
Trigger:- Excellent. I turned mine to 3 1/2 lb. No creep nor after-travel
Bolt:- Very smooth, especially if oiled
Extraction:- no problem. Does it every time
Accuracy:- With my hand-loads I can get 1 MOA without a lot of tweaking

There are a couple of minor annoyance.
1. The pistol grip is closer to the rear of the trigger guard than others. You can have your knuckles hit by the trigger guard during firing
2. If you fire factory ammo. you have no problem. With reloads you have to use virgin brass (preferably resized Lapua which are harder). If you use fired brass from other rifles they have a tendency to get sticky and could be hard to extract. That is due to the bench-rest size chamber this rifle has
I would buy another one of these rifles if the need arises in the future.
Tom
Last edited: