We just received a shipment of the new Forster bump dies.
Will be on site in 24 hours or less.
www.hirschprecision.com
Will be on site in 24 hours or less.
www.hirschprecision.com
Forster Bump Dies
- Thread starter peterdobson
- Start date
Halger280HVMag
CGN Ultra frequent flyer
- Location
- B.C. XMU Local .454
Halger:
The Forster Bushing Bump Neck Sizing Dies are calibre-specific. The choice of the interchangeable bushing is determined by the loaded outside neck diameter. Usually a bushing -.002" of the loaded round would be used, but this will change over firings as the brass looses its "spring-back" characteristic and a .003"+ bushing must be used to obtain reasonable tension.
We have the Neck OAL for most of Lapua's loaded rounds.
Regards,
Peter
PS, New product updated on www.hirschprecision.com
The Forster Bushing Bump Neck Sizing Dies are calibre-specific. The choice of the interchangeable bushing is determined by the loaded outside neck diameter. Usually a bushing -.002" of the loaded round would be used, but this will change over firings as the brass looses its "spring-back" characteristic and a .003"+ bushing must be used to obtain reasonable tension.
We have the Neck OAL for most of Lapua's loaded rounds.
Regards,
Peter
PS, New product updated on www.hirschprecision.com
