Found some cool things for the 858 & wanted 2 know what you think

[Satain]

dsarms.com had some cool looking toys for the ak so I was wondering if there were able to be used for the CZ 858?
They are;
Original Bulgarian 7.62x39 Krinkov 4 Piece Flash Suppressor
dsarms.com/Original-Bulgarian-762x39-Krinkov-4-Piece-Flash-Suppressor/productinfo/KR009B/
AK Tritium Front Sight. M6 x 0.75 thread fully compatible with existing front sight bases - all AK variants
dsarms.com/AK-Tritium-Front-Sight/productinfo/KFS870789/

 

[Corpus]

I think it will work fine for you if that's what suits your taste. I, myself, was looking at the front post sight, but was waiting on a good Vz peep sight to come out that was also low-light capable before doing it. I figure; why do one and not the other; that's my logic anyway. As far as DSA is concerned; I've done business with them for years and they are top-notch. I can't recommend them highly enough; professional, prompt, quality oriented, and fair.

 

[Curtton]

dsarms.com had some cool looking toys for the ak so I was wondering if there were able to be used for the CZ 858?
They are;
Original Bulgarian 7.62x39 Krinkov 4 Piece Flash Suppressor
dsarms.com/Original-Bulgarian-762x39-Krinkov-4-Piece-Flash-Suppressor/productinfo/KR009B/
AK Tritium Front Sight. M6 x 0.75 thread fully compatible with existing front sight bases - all AK variants
dsarms.com/AK-Tritium-Front-Sight/productinfo/KFS870789/

no part of the AK are interchangeable to the VZ/CZ858 so no, you cant use them .

 

[Corpus]

I disagree; Front posts, and Flash Suppressors/ MB's are pretty universal things Curtton. So far as I can tell the front post on the VZ screws in exactly the same way one does on an SKS or AK, and as for the FS/MB, you can put any FS or MB on any rifle. It might take some threading, but that's easy and cheap to get done.

 

[eos]

I disagree; Front posts, and Flash Suppressors/ MB's are pretty universal things Curtton. So far as I can tell the front post on the VZ screws in exactly the same way one does on an SKS or AK, and as for the FS/MB, you can put any FS or MB on any rifle. It might take some threading, but that's easy and cheap to get done.

Vz 58 and AK series have opposite threaded muzzles.

Do-able? You can pound a square peg into a round hole with enough effort.

 

[Curtton]

I disagree; Front posts, and Flash Suppressors/ MB's are pretty universal things Curtton. So far as I can tell the front post on the VZ screws in exactly the same way one does on an SKS or AK, and as for the FS/MB, you can put any FS or MB on any rifle. It might take some threading, but that's easy and cheap to get done.

heck , i can mod a shorter AK handguard to fit a VZ58 but that doesnt mean it is interchangeable .

the two sight post arent even similar , different thickness and different threading .

 

[Corpus]

heck , i can mod a shorter AK handguard to fit a VZ58 but that doesnt mean it is interchangeable .

the two sight post arent even similar , different thickness and different threading .

But if the man wants to do it, then it can be done; and cheaply/easily at that! So where's the problem? He buys the stuff he wants, he spends 25 bucks extra, and BAM, he's happy! Who cares if it's not "supposed" to go on there. It can; pure and simple, and it's not expensive to make it happen, and it's HIS gun, so once again, where is the point of contention? This stuff is in effect suitable for his needs/desires, and it WILL fit, and it WILL work; well! It's not as if he's asking if he can make an AK mag fit the VZ, which it can be made to, but it's a pain, and it's expensive enough to achieve to be cost prohibitive. These 2 items do not fall under that same category. These pieces are very close to the proper tolerance already, and can be made to fit perfectly with almost no effort.

 

[obiwanbonjovi]

you will not be able to rethread a 14x1 lh muzzle device to fit a 14x1 rh barrel you would be much better off buying a 1/2x28 for an ar drilling and tapping it.

the easiest way to make the front sight post work is to just make a new front sight drum that accepts ak posts

 

[Satain]

Thanx guys,
You helped me make up my mind. I just wanted the front post most of all thought that it would be cool for dusk play with the good old tracer rounds.

 

[Curtton]

Thanx guys,
You helped me make up my mind. I just wanted the front post most of all thought that it would be cool for dusk play with the good old tracer rounds.

spend the money on more tracers , they are always fun to shoot .