Front sight tool for VZ58S/858

C

cancer

CGN Ultra frequent flyer
Rating - 100%
211   0   0
Location
Owen Sound, Ontario
Anyone know of a good place to get a SKS front sight adjustment tool for my VZ58S (preferably near Waterloo)? Try as I may, I just can't get that damned front sight to budget with punchs or C-clamps or anything. :mad:
 
Last edited:
an sks front sight tool will work BUT chances are that "new" rifles sight was assembled in the 1960's and it wont move easy I used a brass punch to get mine moving then i used the sks front sight tool
 
Aww man.. I tried using a punch, all I did was dint that metal sight drum on the gun. Err.. I guess I'll just have just keep trying, or figure out something really elaborate.
 
I don't own a VZ/CZ but here's how I moved the windage drum on my SKS to install Firesights, it might work for the CZ/VZ also.

I supported the one side of the barrel with a piece of MDF in my vice and used a short brass bolt against the other side to push it out. Took quite a bit of torque to get it moving but worked well and no damage to the rifle.
 
You must log in or register to reply here.
Back
Top Bottom