FS2000 and PS90 Re-barrel?

sapper043

Regular
EE Expired
Rating - 100%
5   0   0
Location
Saskatoon, SK
Is there anyone that has or makes replacement barrels for a FS2000 or PS90? I want to switch to an 18.5" barrel.

Not interested in Questar unless they are the only source.
 
I've been looking into this too, Questar is the main supplier but Irunguns has the FS2000, although I don't believe they will rebarrel they might be able to find one?
 
I was looking at the IRUNGUN site and I really like the FS2000 CQB but I want it NR. I really want it.

fs2000_cqb_large.png


A lot of work for 1.1 more inch of barrel.
 
Ian at Herron Arms (sponsor) is the guy you're looking for...I have an FS2000 that he made NR, and it rocks. I don't know of ANYONE who's had a bad experience with Ian.

He's busy right now - but by far your best option, since he's done a LOT of FS2000's and PS90s.... he knows his stuff!
IMG_0640.jpg

IMG_0641.jpg
 
Seems like Ian is the guy, bit of a side question (I'll keep it short) so the process is: import/locally buy restricted FS2000, register it, have barrel converted and approved by gunsmith, delete registration as it's then NR?
 
I've been looking into this too, Questar is the main supplier but Irunguns has the FS2000, although I don't believe they will rebarrel they might be able to find one?

Problem is at 2400 from irunguns, plus $100 to import, plus duty and you might as well buy a Questar and have it sooner.
 
That was my next question. Can I ship directly to Heron Arms from IRUNGUNS? This would be perfect then I only pay shipping twice.

And yes I am not interested in dealing with Questar due to the MANY less than stelar reports of thier service.

I would rather pay more to get exactly what I want knowing it will all be done right the first time.
 
Ask Irunguns these questions as they would be the best to be able to answer. While you're asking see if they import bullpups from the US yet, last I read they do not, but again check with the source.
 
I just got off the phone with IRUNGUNS which is a supporting member of the CGN and they have no issues with shipping directly to Heron Arms or any other gunsmith. So this is looking better and better every day. They also had no issue shipping the FS2000 to Canada either.
 
I'm getting 1.5 MOA with bulk ammo.. pretty good in my books!

Haven't fired any handloads through it though... I suspect 1 MOA isn't impossible to achieve. The trigger is the biggest barrier to accuracy for me... especially in any position other than from a bench with a bipod.
 
That's not too bad, actually. That sounds a lot more promising than the Tavor from what others have been getting -- I'm kind of curious if anyone here has shot both the Tavor and FS-2000.

Any issues with p-mags in the FS2000?

Anyway, sorry for the derail. :D
 
Pmags are a no-go in the FS2000. HAven't found any polymers that work.

LAR 10 round mags work, as long as you have the 'c-products' loop baseplate, or have them coupled.. Ranger plates are no good.

As bad as the trigger is on the FS, apparently it's STILL way better than the Tavor. Not many guys have ever got less than 2MOA with a Tavor - sounds like most are 2.5-3 MOA rifles. I'm sure one of the many owners will chime in here...
 
Back
Top Bottom