GINEX primers

kjohn

kjohn

CGN Ultra frequent flyer
Super GunNutz
Rating - 100%
172   0   0
Location
SE Sask.
This topic has been picked apart before, but seeing as I have lots, I'll share my worthless observations.. They do require more effort to seat, no doubt about that. I have recently seated around 100. I tried bevelling the mouth of the primer pocket and found that helps a fair bit.

Any other tips?
 
Their Large pistol primers work great in 30-30 cast bullet loads.
But now that primers are getting more plentiful and affordable I'm not buying anymore ginex
 
Pretty much all my plinking loads use Ginex primers. In 223 and 9mm I'll swage the primer pocket again if im having difficulty or if it feels like im about to crush a primer, thats been working for me. For their LPP I haven't had any issues seating.
 
Good to note I have plenty as well. I’m not picky and will buy anything that’s cheap enough. that said I bought these and over paid most likely at the time but atleast I wasn’t paying $500 a brick off a scalper.
 
Got a good deal on a case of 5000 ginex large rifle primers just as the covid shortages started. They work well but they are simply way too tight in every piece of brass I have tried them in. I have about 4500 left that I plan to leave sitting on a shelf just incase I can't get my hands on anything else.
 
FortHunter said:
Pretty much all my plinking loads use Ginex primers. In 223 and 9mm I'll swage the primer pocket again if im having difficulty or if it feels like im about to crush a primer, thats been working for me. For their LPP I haven't had any issues seating.
Click to expand...
Hmmm. Swaging. I'll give that a try. Thank you!!
 
I've loaded tens of thousands of the ginex small pistol primers over the last couple years and I find that the primers are not the problem...But there are specific head stamps that are tighter than others, and those can be a bit of a ##### to get seated well. One way to avoid it is to seperate your headstamps... teduious but it should help
 
AlphaCharlieDelta said:
I've loaded tens of thousands of the ginex small pistol primers over the last couple years and I find that the primers are not the problem...But there are specific head stamps that are tighter than others, and those can be a bit of a ##### to get seated well. One way to avoid it is to seperate your headstamps... teduious but it should help
Click to expand...
I would buy Ginex if I know they are tighter than others just for that reason. Are you saying they are loose or normal by your experience with different brass manufacture? Cheers
 
Ginex primers are slightly larger in diameter than Federal or CCI. Brass that easily accepts other primers may be a struggle with Ginex. All brass I intend to use Ginex in gets swaged or uniformed as if it had a crimp in it. If using Ginex I would get a dozen cases and see if most seat easily or not. If it's easy then great, continue. If it's a struggle then swage/uniform/bevel the primer pockets
 
270WSMXBolt said:
I would buy Ginex if I know they are tighter than others just for that reason. Are you saying they are loose or normal by your experience with different brass manufacture? Cheers
Click to expand...
What I'm saying is, I don't ream my primer pockets, I use range brass of every different head stamp, and use only ginex primers. Some head stamps are tighter than others, but I can still seat them just fine. As for loose...No they are never loose in the primer pocket. Normal?? Quantify normal... If it seats, it's all good. I have had zero failure to fire in over 25k rounds loaded. Just picked up another 5k brick yesterday actually.
As a point if data, I individually prime every case with the Deraco engineering primer set up. I can set the exact depth and get consistency with it. Seats them perfect every time
 
AlphaCharlieDelta said:
I've loaded tens of thousands of the ginex small pistol primers over the last couple years and I find that the primers are not the problem...But there are specific head stamps that are tighter than others, and those can be a bit of a ##### to get seated well. One way to avoid it is to seperate your headstamps... teduious but it should help
Click to expand...
They actually are problematic as other comparable primers made by Federal, CCI, Winchester, Remington and Fiocchi go in easy and smoothly. Cup diameter and hardness have to do with it.
 
You must log in or register to reply here.
Back
Top Bottom