Glock 17c in IPSC
- Thread starter mardig88
- Start date
from the approved guns for production. http://www.ipsc.org/proddiv.php
GLOCK 17, 19, 20, 21, 21SF, 22, 23, 26, 27, 29, 30, 31, 32, 33, 36, 37, 38, 39
Also approved are variants with original Glock barrels which are longer than standard (e.g. 17A, 17DK), as well as variants with "Tactical", "Mariner" or similar OFM engravings on the slide, provided the barrel length does not exceed 127mm, and provided all other aspects of these variants fully comply with all other Production Division rules.
Not Approved:
18, 24, 25, 28, 34, 35, L and C models
GLOCK 17, 19, 20, 21, 21SF, 22, 23, 26, 27, 29, 30, 31, 32, 33, 36, 37, 38, 39
Also approved are variants with original Glock barrels which are longer than standard (e.g. 17A, 17DK), as well as variants with "Tactical", "Mariner" or similar OFM engravings on the slide, provided the barrel length does not exceed 127mm, and provided all other aspects of these variants fully comply with all other Production Division rules.
Not Approved:
18, 24, 25, 28, 34, 35, L and C models
but if you want striker fire with low muzzle rise S&W M&PL or pro is ok
S&W 39, 59, 410, 439, 459, 539, 659, 669, 908, 910, 1006, 1066, 3913, 3913L, 3913TSW, 3914, 3953, 3953STSW, 4006, 4043, 4046, 4013TSW, 4053TSW, 4513TSW, 4553TSW, 457, 4506, 4566, 4586, 5904, 5906, 5946, 6906, 6926, 6946
SW99, M&P9, M&P9 Pro, M&P9L, M&P357, M&P40, M&P45
(Any DAO or DA/SA revolver with a barrel length of up to 5" is approved)
S&W 39, 59, 410, 439, 459, 539, 659, 669, 908, 910, 1006, 1066, 3913, 3913L, 3913TSW, 3914, 3953, 3953STSW, 4006, 4043, 4046, 4013TSW, 4053TSW, 4513TSW, 4553TSW, 457, 4506, 4566, 4586, 5904, 5906, 5946, 6906, 6926, 6946
SW99, M&P9, M&P9 Pro, M&P9L, M&P357, M&P40, M&P45
(Any DAO or DA/SA revolver with a barrel length of up to 5" is approved)
- Location
- Prince George B.C.
Does the M&P Pro pass the trigger test?
John
John
- Location
- Prince George B.C.
Well what I hear is that it was placed on the PD approved list based on info from S&W that the trigger was 5+lbs. Their website indicates a trigger pull of 4.5 - 5Lbs. Borderline for PD.
The other issue is wear in. I used to shoot a M&P 9mm in PD. With absolutely zero trigger work the gun failed 2 out or 3 tries on the trigger test. This was after I put 5K+ through the gun to wear it in.
Could be a problem.
John
stormbringer
CGN Ultra frequent flyer
- Location
- S.W. Ontario
Or modified..............
Oh Christ...now all the Winsdor guys will be showing up with Glocks and shooting Modified... again...
- Location
- Prince George B.C.
- Location
- Halifax - NS
Nope. That barrel is not a factory option from Glock for the 17 and it's too long
(No guns with barrels over 5" are on the approved list)
