TacticalTeacher
CGN Ultra frequent flyer
- Location
- Georgian Bay, ON
I’m back in the Shwa once again! I love these CDN Gunworkx folks! This time I can only take 15 M14 lovers. It gets very tight there. Don’t worry, I am working on a February date also .... 
Where:
CDN Gun Works in Oshawa.....
18-712 Wilson Road South
L1H 8R3 Oshawa, Ontario
When:
Saturday 26 January 2019
Timings:
1000 - 1600 hrs. This will match the store hours
Cost:
$60 for the DAY
Registration and Payment:
EMT the $60 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell.net
Somewhere in the EMT, remind me of your CGN handle AND which clinic it's for (PR or CQB or M14)
RBC tweaked my EMT software into direct deposit...so EMT process may be shorter!
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will try to pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am Set up to do indexing....have my large hitch mounted vise and pickup truck!
Things to bring for Day 1:
* Your M14 rifle or receiver(s) with barrel(s) to be installed
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
* Anybody got a Black and Decker Workmate? Bring it along, leave it inside the car/truck until we need it.
* Wanna assemble your IDF Parts kit from Wolverine? We can do that, too!
Questions?
Bring them on!
Cheers and warm regards,
Barney
Where:
CDN Gun Works in Oshawa.....
18-712 Wilson Road South
L1H 8R3 Oshawa, Ontario
When:
Saturday 26 January 2019
Timings:
1000 - 1600 hrs. This will match the store hours
Cost:
$60 for the DAY
Registration and Payment:
EMT the $60 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell.net
Somewhere in the EMT, remind me of your CGN handle AND which clinic it's for (PR or CQB or M14)
RBC tweaked my EMT software into direct deposit...so EMT process may be shorter!
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will try to pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am Set up to do indexing....have my large hitch mounted vise and pickup truck!
Things to bring for Day 1:
* Your M14 rifle or receiver(s) with barrel(s) to be installed
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
* Anybody got a Black and Decker Workmate? Bring it along, leave it inside the car/truck until we need it.
* Wanna assemble your IDF Parts kit from Wolverine? We can do that, too!
Questions?
Bring them on!
Cheers and warm regards,
Barney
Last edited:
