H335 with military brass...

[blindman]

I just picked up some H335 powder, and was wondering if 23 grains of powder under a 55 grain bullet at 2.200 will be OK? Has anyone else used this powder with military brass? I know it will be fine for regular brass, but I was told to reduce the powder 15 % with military cases. I know the max is 25.3 for this load, so I was just going to start at the starting load of 23 grains. If anyone has had experience with these loads, either too hot, or not hot enough, please feel free to let me know! Cheers!

 

[Canuck223]

Be cautious, but it's damned hard to produce an unsafe load with H335 and 55gr bullets.

I may have some leftover powder for you. See you on the 16th.

 

[blindman]

Sounds good Canuck! Cheers!