Hi,I have a early model Fabrique Nationale Browning .22 pump that has a broken firing pin.Can anyone direct me to a site on how to completely disassemble a fn Browning for dummies,I am having troubles with it.Some knowledge or tips from anyone who has experience with these would also be helpful.I cannot even seem to find schematics on Brownings site for these.Thanks in advance.Dave
help disassembly fn browning .22
- Thread starter reloaders
- Start date
I had one of these FN's a few years ago.
The bolt mechanism will come out.
Seems you had to roll it out in a certain manner.
Pay real close attention because I remember having
to scratch Huey, Luey and Duey a bit to get it back in.
Hope this site will work for you.
Cheers.
http://media.browning.com/pdf/om/22semiautomanual.pdf
The bolt mechanism will come out.
Seems you had to roll it out in a certain manner.
Pay real close attention because I remember having
to scratch Huey, Luey and Duey a bit to get it back in.
Hope this site will work for you.
Cheers.
http://media.browning.com/pdf/om/22semiautomanual.pdf
its very easy to disassemble/field strip. Not sure how to get the firing pin out without taking mine apart, but once you get the bolt out, you'll see for yourself...
Unscrew the take down screw and separate the butt stock/trigger from the receiver. Flip the receiver over and take your thumb and forefinger nails and pull the center strip up (right where it meets the pump handle) from the middle of the pump arm and slide this peice out the back of the reciever. Once that is out, you can slide the bolt out the back.
Unscrew the take down screw and separate the butt stock/trigger from the receiver. Flip the receiver over and take your thumb and forefinger nails and pull the center strip up (right where it meets the pump handle) from the middle of the pump arm and slide this peice out the back of the reciever. Once that is out, you can slide the bolt out the back.
