Help ID my Enfield

shoot_to_kill

CGN Regular
Rating - 100%
80   0   0
Location
Luskville quebec
Hello, I am looking my enfield no 4 mk 1 over, and wondering what some of the markings mean. Just wondering if the gun is complete or pieced together? Also country of origin? Looks like electro stenciling on the receiver that has the date 48 in it. Also has a DF marked underneath the gun on the wood. Looks like a star of underneath the grip too. Any insight would be helpful.








 
It's a Maltby from 1944 that was FTR'd (factory through repaired) in 1948 at Fazakerly. (Both in England). I think the DF is actually a DP which means for Drill Purpose. Not sure about the star if there is a W inside it it could be Weedon Supply Depot but I could be way off there.

Tyson
 
Last edited:
Interesting, so its from England then. Cool. What is up with the black paint peeling off of it? Was that added at the factory refurbishment in 48? Rough estimate of value? Is it just a run of the mill Enfield?
 
If the stocks are original to the rifle have someone who knows look it over before you fire it. Your "DF" stamp is actually a "DP" stamping on the stock ("Drill Purpose" only...ie don't shoot it, it's fu<ked)
From the receiver markings it was "FTR'd" (Factory Through repair) at the Fazerkley England "(F)" arms depot in 1948. Commonly referred to as "Faz".
From the wrist markings it was built in 1944 and I believe "M" may stand for Maltby (again in England) the wrist also has the Broad Arrow Government property mark^, and the serial number of the rifle.
As to the star, memory (which might be failing here) serves, that is from Iraq.
There will be other markings on the knox form where the barrel meets the receiver, you will want to carefully remove the fore wood and look for other DP stamps. Also look to see if all parts have the same serial number.
I'm no expert on these and someone with much more knowledge than myself will step in and correct me or further assist you. I am 100% positive on the DP stamp though. Whether the stock which is DP'd actually belongs to the gun is another matter, and even if so, why it was DP'd is another question. Everything from cracked receiver/chambers to the fact that the cadet corp needed a drill purpose rifle after the war and there is absolutely nothing wrong with the rifle was why they were DP'd.

:redface:sh1t Swan beat me to it! :)
The Black paint is called suncorite and was the rifles original finish.
.
.
...looking at that last pic has me wondering if someone hasn't fiddle farted with that receiver (welded a drill through spot (DP) closed and refinished the spot) have someone look at that, before you chamber one.
 
Last edited:
Back
Top Bottom