Help identifying steel rimfire rings

S

stickhunter

CGN frequent flyer
Rating - 100%
575   0   0
Location
Victoria, B.C.
Hi all,

I bought a used scope that came with some steel rimfire rings installed. I suspect they are 3/8" as they appear slightly wider than my 11mm Talleys.

There are no markings on the rings, and my Google-fu is failing me --- in particular, I'm having troubles finding rimfire rings that have clamps on both sides (aside from the Millet alloys, which these are definitely not). I thought these may be Weaver Grand Slams, but the pictures I've found of those only show a single clamp.

Hoping someone can help me identify the make... thanks!

JAYEGXCh.jpg

EUtWslwh.jpg
 
retoxtony said:
They look like Weaver rimfire rings but I suspect they might be a little older. The newer ones only clamp from one side. The top part looks identical though.

https://www.weaveroptics.com/rings/1-rings/.22-top-mount-rings/1795.html
Click to expand...

Thanks for the push --- that got me thinking along the vintage line, so I checked eBay and I think I found them (or their like --- they may be generic):

h ttps://www.rebelgunworks.com.au/collections/ccop-delta-rings/products/delta-rings-3-8-rimfire-30mm-low

IMG_3244.JPG


CCOP is another brand that I see on eBay
 
Some scope bases are designed to reverse the clamps so that one way is 3/8's and the other ends (or sides) are 11 mm.
That is why the two appear different.
Leupold Rings Mounts are different so there is a different number for each.
If memory serves me correctly, the 54234 is a high 11mm for CZ's.

If Weaver, the use of TORX screws makes them more recent . . . some one ordered a million slots and they wanted to use them up first.
 
You must log in or register to reply here.
Back
Top Bottom