I've got about 30 rds of this stuff:
Case is steel, bronze finish, same length as a .303 (but not a .303br), bullet size is .310" or 7.89mm, bevel on the bottom of the rim with a 50 raised on the outside. Was going to pull bullets for my .303 since they are all fmj's. Pics to follow. Looked up the 7 x 57, 8mm mauser and 8mm x lebel and its not those. Came with two 5 rd lips that had a triangle stamped on it.
I'm sure its east block stuff, but am totaly unfamiliar with east block ammunition.
Overall bullet length 3.015"
Case length = 2.016"
Base diameter = 0.482"
diameter at shoulder = 0.449"
rim diameter = 0.564"
length to shoulder = 1.569"
tapper end 1.733"
Any ideas?
Chewy
Case is steel, bronze finish, same length as a .303 (but not a .303br), bullet size is .310" or 7.89mm, bevel on the bottom of the rim with a 50 raised on the outside. Was going to pull bullets for my .303 since they are all fmj's. Pics to follow. Looked up the 7 x 57, 8mm mauser and 8mm x lebel and its not those. Came with two 5 rd lips that had a triangle stamped on it.
I'm sure its east block stuff, but am totaly unfamiliar with east block ammunition.
Overall bullet length 3.015"
Case length = 2.016"
Base diameter = 0.482"
diameter at shoulder = 0.449"
rim diameter = 0.564"
length to shoulder = 1.569"
tapper end 1.733"
Any ideas?
Chewy
