Help with CZ-BRNO rifle ID

Ghunter

Ghunter

CGN Regular
Rating - 100%
83   0   0
Location
Northern Ont.
How can I tell which model this CZ is? There is no model #. Aside the CZ markings all I have is a "60" stamped on the left side of receiver and a (I think) serial # on right side.
I need to order a stock for this rifle.
Any help would be appreciated. Feel free to PM me.
Thanks
409471330.jpg

409471353.jpg
 
600 series with a pop up peep site, with non-delux stock, with single set trigger (you push the trigger forward to "set" it)
If a 30-06 size -its a 600
If a 308 size - its a 601
If its a 375 size - its a 602
 
Last edited:
Replacement stock may be a bit of a problem ....and there will likely be a third "action" screw that goes through the forearm and engages a dovetail bolt that rides in a corresponding groove under your rear sight boss (where the leaf sight is on the barrel).....you may not really need that feature but it was put there by BRNO for their own reasons and all my zkk's with this feature shoot great. Whats wrong with your stock? Action length?
 
It's a 30/06 and stock broke at pistol grip and was patched. Just worried it might come apart when you most need it...
Can it be professionally repaired??
Thanks
 
Can it be professionally repaired??
Click to expand...
I am not an expert or a "professional" .. but there are folks that would charge for work which would qualify them as a "professional" but give you a piss poor job and there are amateurs that do this work and do an excellent job..... there are several posters on here that can fix this I think and some who can tell you who to speak with. I would first email "Guntech" or "Robertson" .. the later made outstanding synthetic stocks and may have some guidance for you. Could be the current job is fine; alternatively some folks may recommend installation of steel/brass pins, screws, threaded rods or dowels to strengthen the area broken. If it has been glued --- it may be hard to remove the residual to replace it with another (better?) glue. I have a stock for this rifle somewhere and took a while to find it ... alas someone used a bedding compound on it and it is not pretty ... but I purchased it in case I had a problem such as yours. Not planning on selling right now.
 
You must log in or register to reply here.
Back
Top Bottom