Help with Ponsness Warren 375

[OverUnder725]

Hey all, looking for someone that has a Ponsness Warren 375 in 20 ga. I need to build a shell ejector rod for mine, the set of tooling mine came with does not have one. It is the shaft that hangs above position 1 to push the finished shell out of the die. If someone could take a photo or make a sketch with dimensions measured with a calliper, I would greatly appreciate it!

 

[Scroggins]

If you have the 12 gauge tooling, you should be able to scale iy down. Length should be the same, smaller diameter and similar profile.

 

[OverUnder725]

Yeah, after some looking at it, that's what I did. Spun one up on the lathe last night.