Here Piggy Piggy Piggy

R

rifleman338

CGN frequent flyer
Rating - 100%
298   0   2
Location
Ontario
Finished up my SBR Pork Sword build. Specs are as follows,
-Tikka T3X donor action
-IBI 12.5" with barrel nut install system in 308Win, 1/10twist
-MDT LSS chassis
-Noveske Flaming Pig
-Vortex Viper PST Gen2 1-6 MRAD in Vortex rings siting on an MDT pics base
-Magpul furniture
-33 1/2" tip to tip with stock collapsed
mOoHQU5.jpg

cTbLDZk.jpg

Fresh build so no range reports to report
 
Last edited:
I’m always curious about the under 18 inch barrels . Barrels normally come in at slightly longer than your ordered length no? Doesn’t matter I guess if it’s factory produced with the intention of being cut and crowned

Do you get it electro penciled by the manufacture or anything?

I like these guns I’m just paranoid I guess, cool build. Would love to see a vid of it being shot at dusk. On NZ gun forums they call these “ bush pigs”
 
conor_90 said:
I’m always curious about the under 18 inch barrels . Barrels normally come in at slightly longer than your ordered length no? Doesn’t matter I guess if it’s factory produced with the intention of being cut and crowned

Do you get it electro penciled by the manufacture or anything?

I like these guns I’m just paranoid I guess, cool build. Would love to see a vid of it being shot at dusk. On NZ gun forums they call these “ bush pigs”
Click to expand...
I ordered it from IBI at that length and it is marked by the threads, but due to setting headspace it is a the six o'clock so you cannot see it without taking it apart.
 
Slimbo said:
That’s awesome.

Do you need to modify the tikka to use a barrel nut? Or does it just screw right on?
Click to expand...


Barrel screws right in without and action mods although getting the old one off was a pain in the nuts, you would think they welded the thing in with how tight it was so we had to do a relief cut at the shoulder to get some tension off, but after that it came off easily. Just used GO and NO Go gauges and tighten the barrel nut.
 
You must log in or register to reply here.
Back
Top Bottom