HK AG36 Help

[Chris7_62]

If anyone has the HK AG36 armorer's manual, parts diagram, etc - need copies. Really be appreciated thanks.

 

[Shrapnel]

I don't have a manuals but I have the launcher! If you need some pics...

 

[Chris7_62]

yes please, can you get internals & fire control group?

 

[Shrapnel]

Hummm... That would mean taking it apart! I don't know if it would be wise!! I can have a look to see if it's possible...

 

[Chris7_62]

Yeah, thats where I'm at. Its in pieces and needs to be put together. Not complex, I just need a little pictoral so I can see how it works. Trigger mech is giving me grief.

 

[KevinB]

It has some pins that should not be removed except by the factory...

 

[Chris7_62]

Got it together, thanks all.

Kev - I didn't take it apart.

 

[KevinB]

ah
good to hear you got it together.

 

[Chris7_62]

Quite simple really, after you see how the pieces fit. Cool bit of gear. How have you mounted yours?

 

[KevinB]

Well stupid me it was not till MikeH was here this w/e I realised it slides on M1913 rail ( I should have remembered it from the L119A1)

 

[Shrapnel]

Mine mounts on a M4 type upper using the bayonet lug... Or I could remove the adaptor bits and use a rail like KevinB. Glad you put everything back together OK! I was not too thrilled to remove the roll pins!

 

[Shrapnel]

BTW, has anyone of you found a source of 40mm practice ammo in Canada? I know plenty of places in the US where I can buy those lovelly blue TP rounds with the orange powder inside but getting it in Canada is difficult! If you have rounds you could spare, I would buy!

 

[koldt]

BTW, has anyone of you found a source of 40mm practice ammo in Canada? I know plenty of places in the US where I can buy those lovelly blue TP rounds with the orange powder inside but getting it in Canada is difficult! If you have rounds you could spare, I would buy!

Make your own.