Holster for TT33

[tiriaq]

Like many others, I bought one of the new Polish Tokarevs.
Was looking for a modern holster for it. Had a Blackhawk Serpa on hand for the 1911. Waaay too big for the much smaller TT33. But the latch engaged the trigger guard in a satisfactory manner.
Took a piece of ABS black plastic pipe about 5" long, and cut a longitudnal strip about one third of the circumference wide. Slipped this into the holster, against the front sight track. This keeps the pistol very nicely in place. The muzzle is about 3/4" inside the end of the holster. Will drill a hole and use a nut and bolt to keep the reducer in place.

 

[Dyspnea]

Someone on cgn, cut down the issued holster and modified into a more easily accessible version.

Here is the thread http://www.canadiangunnutz.com/foru...dded-My-TT33-Holster-D&highlight=Tt33+holster ,but the photos are dead

 

[tazik]

Someone on cgn, cut down the issued holster and modified into a more easily accessible version.

Here is the thread http://www.canadiangunnutz.com/foru...dded-My-TT33-Holster-D&highlight=Tt33+holster ,but the photos are dead

Unfortunately pics are not available, I would like to see those pics (I have two holsters)

 

[trebor2880]

And has anybody seen a place to get wood grips for them?

 

[tazik]

And has anybody seen a place to get wood grips for them?

Sometime on Ebay

 

[Galt]

Like many others, I bought one of the new Polish Tokarevs.
Was looking for a modern holster for it. Had a Blackhawk Serpa on hand for the 1911. Waaay too big for the much smaller TT33. But the latch engaged the trigger guard in a satisfactory manner.
Took a piece of ABS black plastic pipe about 5" long, and cut a longitudnal strip about one third of the circumference wide. Slipped this into the holster, against the front sight track. This keeps the pistol very nicely in place. The muzzle is about 3/4" inside the end of the holster. Will drill a hole and use a nut and bolt to keep the reducer in place.

Which model number?

 

[tiriaq]

S?212? Paddle is C1352.
Standard CQC Serpa for 1911.

 

[Galt]

Thanks, will try that for my NP17

 

[trebor2880]

Sometime on Ebay

Thank you, I do look there sometimes, but they sure do have a pile of grips to go through.

 

[canukatc]

I found these in an army surplus store in Aylesford NS. Pretty sweet for the TT33. Our MP's used to use em for the BHP.

http://www.canadiangunnutz.com/foru...r-Browning-TT33-users!!&p=6933754#post6933754

Cheers

 

[red_bailey]

Site sponsor Interammo up top has a listing of Holsters on their site. The Tokarev section is empty, but they are ordering more, which are supposed to be here in some weeks. Bug them about it so they will notify you when available.

These are nice custom-fit leather holsters made in Russia; you can look at their selection for Makarov and Viking pistols to get an idea of what you'll see.

 

[Anyad Pitchaya]

And has anybody seen a place to get wood grips for them?

Check out marschalgrips.com

Long delivery time, but they are second to none. I have three of them.

On of our Range Officers liked my Tok so much, he got a set for his CZ 52.