Hornady Case feeder and the 9mm saga.

[slicknova]

Does anyone have a solution to the horrible performance of this case feeder with 9mm? between jams at the top of the funnel and upside down cases I'm lucky to get 10/15 rounds before a problem. Is this normal? I hope its a 9mm thing, its the first caliber I've tried with it....it does make things quicker, but could be soooooo much better!! Any ideas?

please move to reloading....

 

[Rotaxpower]

Mine works pretty good when I load 9mm,

 

[slicknova]

I think I got it figured... At least improved..... I did some adjustment to the plate at the top, moved it all the way to the right. I tightened the clutch bolts on the feeder plate, this helped alot with the amount of brass i can fit in it (i had no idea there was a adjustable clutch assembly). The Flipping and jamming cases I believe was caused by a less then solid mount to my bench. The press is not in its final home and is set up temporally. The shaking is what was flipping the brass.

So long story short, the feeder was performing as it should, I was the one who had the horrible performance!!