Hello So I bought a bunch of reloading gear on the cheap at a gun show including a Hornady Projector reloading press.
Cleaned the press up and it came out pretty good. Still have a bit of work to do. 
The pawls and star appear to be in good condition. I don’t have a manual but what I have read on line is not to adjust the set screws near pawls. Well I took them out to clean unit. Does anyone have experience with this machine & where to start with these set screws and pawl adjustment It’s way out of timing This is different than Hornady’s newer machines. My reloading has been on Dillon presses
Thanks in advance
Cleaned the press up and it came out pretty good. Still have a bit of work to do. The pawls and star appear to be in good condition. I don’t have a manual but what I have read on line is not to adjust the set screws near pawls. Well I took them out to clean unit. Does anyone have experience with this machine & where to start with these set screws and pawl adjustment It’s way out of timing This is different than Hornady’s newer machines. My reloading has been on Dillon pressesThanks in advance
