How do I get Dragunov fibreforce SKS stock off.

[busterboyd]

Is there a schematic or video on how to remove stock?
I allready know how to dissasemble firing mechanism.

 

[Geoff B]

Take off the trigger group, then pull the rest up and out of the stock, pivoting on the front of the stock.

 

[punkrockboy]

....then burn the dragunov stock,install the Tapco.......

 

[AdVanL]

....then burn the dragunov stock,install the Tapco.......

Whats wrong with the Dragonuv?

 

[Calum]

Take off the trigger group, then pull the rest up and out of the stock, pivoting on the front of the stock.

Put the safety on first!

As in the fire mode it locks up the trigger group and prevents the release button from working.

 

[marshall]

If you have your trigger out and it will not come apart, use more pressure at
rear of reciever, some of these are real tight fit in the stock.
To remove the trigger group, as mentioned above check the safty
and then push in hard on the plunger at rear of trigger gaurd- it has a
very heavy spring under it.and pull the trigger group up and out.
You can't be gentle with these.

 

[Calum]

Once the safety is on you can also try to lay the rifle sights down on something padded but firm (ones thigh would work) with the barrel front sights hanging over the edge, and using a small brass punch and a mallet to give the trigger group release button a tap or two.