How do you clean a mossberg 500 tactical turkey

xeon

xeon

Regular
Rating - 100%
11   0   0
Alright, im completly confused. How are you supposed to be able to remove the trigger housing without removing the dam stock??? The stock came glued to the dam gun too I think, so really, what gives?

Thanks!
 
#### the gun first, punch out the trigger group pin. Hold the gun with the loading port facing upwards, seize the trigger group at the rear by the trigger guard and pull up until the trigger group comes free of the receiver. The cartridge stop and the cartridge interrupter will fall free once the trigger group is removed and are easily removed. The bolt slide and the elevator are removed from the bottom from where the trigger group was and the bolt is pushed forward until it exits the receiver through the barrel recess.

Putting it back together is done by reversing the process, the cartridge stop and interrupter must be held in place while the trigger group is replaced. Engage the front of the trigger group into the receiver slot then press down on the trigger guard with the palm of your hand and it will slide into place, then the pin can be replaced.
 
xeon said:
Alright, im completly confused. How are you supposed to be able to remove the trigger housing without removing the dam stock??? The stock came glued to the dam gun too I think, so really, what gives?

Thanks!
Click to expand...

The stock came glued to the gun?
 
never heaard of the stock being glued to the gun .remove the but pad threr should be a large flat head screw holding the stock on at least thats the way my mossberg turcky gunis and most are
 
You must log in or register to reply here.
Back
Top Bottom