How do you seat a full wadcutter into a 38 special or 357 Mag.

Mine protrude out of the case mouth. If you have data for the bullet and load it should come with a COL. I've seen them also loaded flush with case mouth. Shorten COL and increase pressure.
 
before the taper crimp....
myreloading011.jpg


these are .32 mag,....
 
Cast w/cs usually have a crimping groove and I would use that,which will leave a little outside of the case....the bullet in the above photo looks like a factory swaged lead bullet and my not have a similar crimping groove.
 
Back
Top Bottom