how to remove ambi safety on norcm4?

[nza]

I have the rifle, but no manual. Anybody done this yet? I need to remove the safety selector so that I can replace with better trigger.

 

[vader_z]

Them Ambi on my RRA LAR-15 has an allen head screw in the middle on one side of the safety selector.

 

[nza]

mine has a flat head notch. I just start unscrewing while keeping the safety from moving and that should release the one side?

 

[enefgee]

That will remove the off side 'knob', actually removing the safety will require removing, or partially removing various parts.

 

[nza]

once the one side is off, I know the rest. (famous last words)
Thanks

 

[Wilks]

Take the screw out, pry the lever off, screw the screw back in.

and you're done

 

[Leg]

Maybe I'm missing something since all I've ever worked with is the stock single stage trigger but I've never had to remove the safety to remove or reinstall a trigger mech.

 

[nza]

Well if you've seen the norc m4, you'd quickly realize that its in no way, a decend finish on the safety. Not only that, but I find it a little more work to try to slip the trigger assemble back underneat the safety. So while the trigger assembly is out, there's also good time to give the selector switch a polish. er saftey I mean.

After I removed the safety, the rest was as easy as using the punch tool to drift out the pins. I replaced the trigger assembly with a spare DPMS LPK I had kicking around. with a quick polish job using a couple of qtips and a lot of auto polish, the trigger is fantastic now. I shall keep the oem as my spare emergency lpk.

THanks peeps for your help.