How to ?

final shot

New member
EE Expired
Rating - 0%
0   0   0
Location
Hull
Hi,
if I don't have $1200 to buy an AR-15, so where should I start to build it, how should I register it ? Where to buy lower and upper ? What problems could I meet ?
Need help in Ottawa - Hull area...
Best regards,
Rob
katana_1127@hotmail.com
 
Lower reciever is the only part that is registered. Might want to start there.

There are a few threads running on the first page here in regards to stripped and assembled lowers. Might want to check those out.

Also, if you gradually buy parts here on CGN on the Exchange forum, you will see that it can be quite cost effective.

Cheers,

Alex
 
If you want cheap, go with a Norinco 311. Can be bought for under $700 if you look hard enough.

Second option: buy a lower (stripped or complete), and buy the other parts as they become availble for cheap.

Some guys have built AR's (name brand) for less than $1000. You just have to be willing to wait for deals!

Have fun!
 
i dunno decide what you want to shoot at first or how cool you want it to look then pick a barrel, it's usually the most expensive part if you buy a good one . If going for cool nothing beats the 14.5" M4 profile

my 2 bits
 
Back
Top Bottom